The characteristics of the general bearing heater

　　A, complete function, easy to operate:
　　Temperature control and time control, temperature, continuous installation, automatic on the conjugate rod combination, demagnetization, voltage adjustment, voice signal, and error operating hints, and other functions; The show at a glance, easy to operate.
　　Second, the security:
　　A. your security:
　　1, according to the association of German electricity engineering standard design;
[You must be registered and logged in to see this image.]
　　2, over-current and fault protection circuit.
　　B the workpiece security:
　　1, only for the heating of the metal, don't lose lubricant;
　　2, don't knock the impact, extending the service life of the workpiece.
　　Three, high thermal efficiency:
　　Heating speed, efficiency is as high as 98%. According to statistics, than the traditional way of oil heat energy saving 80%, than the electric [You must be registered and logged in to see this link.] furnace is the saving electricity was above 60%.
　　Fourth, the intelligent operation process, high precision:
　　Controlled by microcomputer operation process, easy to maintenance module design, automatic control program, soft start, soft stop, automatic correction of heating speed, etc.
　　Five, the product is durable:
　　Product development and design scientific and reasonable, internal components quality is good, clavier dust, waterproof and oil than other heater has a longer service life.
[You must be registered and logged in to see this image.]
　　Six, wide range of use:
　　Only for bearing, can also be used to install the seal oil bearing, gear, gear lever, sealing ring, spacers, piston, collar, belt wheel, liners, etc.
　　Seven, the practical, model is complete:
　　From 2.0 KVA to the 100 KVA of different models. Above 2 kva into the suitcase, 14 kva in carts, both is advantageous for the on-site construction operations.
[You must be registered and logged in to see this image.]
　　Eight, the environmental protection:
Consume electricity this renewable resources, clean and no coke smoke, no smell, no waste, etc. To improve the working environment, workers can not only reduce the labor intensity of workers, and improve the assembly process, achieve civilized production, is advantageous to the enterprise sustainable development.